Pumps and Power Packs

Canflex “Pumps and Power Packs” offer a proven submersible pump off loading system for its “Sea Slug” Ocean Towable Bladders. In addition, Canflex offers a manufactured top center off-load hatch assembly that allows the submersible pump to be lowered into the center of the bladder. This top center hatch opening is available for “Sea Slugs” in the sizes of 20 m³ capacity or larger. This is a fast and efficient method of off loading and is achieved by simply lowering the custom watertight cap with the pump attached into the Sea Slug. With the pump now locked inside the bladder, all hydraulic power hoses and off-load fluid connections can quickly be connected to external fittings on the pump adaptation cap.

Canflex also offers positive displacement Archimedes screw pumps or Centrifugal screw submersible pumps with off-load capacities from 20 m³/h to 170 m³/h. These high capacity pumps, driven by their respective diesel engine powered hydraulic power packs will off-load a wide variety of fluids including high viscosity crude oils.

Also available are non-submersible, portable diesel engine power type pumps with off-load capacities from 11 m³/h to 600 m³/h. This type of pump can be connected to our stern off-load hose connection or at one of the top NPT flanged fittings.

Some of the Power Pack features are:

Choice of engine/motor types: diesel, electric and gas
Wide range of power options
Lightweight aluminum construction
Multipurpose and simple to maintain and operate
Enclosed or open design
Hose management systems

Some of the Pump features are:

Pumps are suitable for all oil recovery applications
Extreme viscous oil and debris handling capability
Total wear protection
High discharge pressure of 12 bar, even on water
Capacities from 20 to 140 m³/h (88 to 616 USGPM)
Simplified maintenance and repair

Applications include, but not limited to:

Technical Information

CANFLEX “NON SUBMERSIBLE” OIL/FLUID TRANSFER PUMP

Model	Power Requirements	Pump Speed	Capacity	Suction Lift	Max Solids Size	Air Handling	Inlet/Outlet Port	Delivery Head
	kW	rpm	m³/h	m	mm	l/s	mm	m
	hp	rpm	gpm	ft	in	ft³/min	in	ft
PD50	0.75	90	11	8.8	13	–	50 / 75	12
PD50	1	90	48.5	29	1/2	–	2 / 3	39
PD75	2.5	1500	30	9.1	6	3.77	75	30.5
PD75	3.3	1500	132	30	1/4	8	3	100
PD100	6	1000	77	9.1	16	11.8	100	20
PD100	8	1000	339	30	5/8	25	4	66

CANFLEX “SUBMERSIBLE” OIL/FLUID TRANSFER PUMP

Model	Length	Width	Height	Weight	Capacity	Hydraulic Flow	Hydraulic Pressure	Power Requ.	Discharge Pressure
	mm	mm	mm	kg	m³/h	l/min	bar	kW	bar
	in	in	in	lbs	gpm	gpm	psi	hp	psi
CFL/GTA30	300	195	435	25	30	75	210	26	12
CFL/GTA30	11.81	7.68	17.13	55.12	132.1	19.81	3,045.79	34.85	174
CFL/GTA115	500	300	598	71	115	160	210	56	12
CFL/GTA115	19.69	11.81	23.54	156.53	506.3	42.27	3,045.79	75.07	174
CFL/GTA140	500	300	598	71	140	160	210	56	12
CFL/GTA140	19.69	11.81	23.54	156.53	616.4	42.27	3,045.79	75.07	174
CFL/MSP150	490	490	750	83	400	250	130	50	6
CFL/MSP150	19.29	19.29	29.53	182.98	1,761	66.04	1,885.49	67.02	87.02

Note: Contact Canflex for the full selection of submersible pumps

CANFLEX POWER PACKS

Model	Length	Width	Height	Weight	Hy Circuits	Hydraulic Flow	Hydraulic Pressure	Power Requ.
	mm	mm	mm	kg	pcs	l/min	bar	kW
	in	in	in	lbs	pcs	gpm	psi	hp
CFL/PP20L	1000	600	950	300	2	60	180	21
CFL/PP20L	39.37	23.62	37.40	11.81	2	15.85	2,610.68	28.15
CFL/PP30D	1345	810	1100	600	3	106	180	35
CFL/PP30D	52.95	31.89	43.31	23.62	3	28	2,610.68	46.92
CFL/PP50D	1600	1050	1340	900	3	160	200	58,1
CFL/PP50D	62.99	41.34	52.76	35.43	3	42.27	2,900.75	77.88
CFL/PP80D	1800	1200	1600	1400	3	156	250	77
CFL/PP80D	70.87	47.24	62.99	55.12	3	41.21	3,625.94	103.22